Replacing Broken or Missing Pool Tiles
Most cracked, chipped or missing pool tiles can be replaced without major work. Pool tile replacement comes down to five steps: inspect the area, match the tile, lower the water, set the new tiles and let them cure.
We handle this as part of pool tile cleaning and restoration, so we can clean and repair a waterline in the same visit.

Why Tiles Crack or Pop Off
Water getting behind the tile is the most common cause. Most other causes either let water in or weaken the bond.
- Water behind the tile. Cracked or missing grout lets water reach the bond and weaken it over time.
- Age. Adhesive and mortar break down after many years of water and Southern California sun.
- Ground and structure movement. Slight shifting can crack tiles and grout.
- Impact. Pool toys, cleaning tools or furniture can chip tiles.
- Scale and harsh cleaning. Thick calcium scale can work its way behind a tile and push it off. Aggressive scrubbing on weak grout can loosen tiles too.
Anaheim’s hard water makes scale a frequent culprit. If your waterline has a white, crusty band, check the grout lines too.
Inspection and Tile Matching
We inspect the whole tile line, not just the missing piece. Tap the tiles near a gap with a handle or knuckle. A hollow sound usually means the bond has failed, and it’s better to reset those tiles at the same time.
| Step | What happens |
|---|---|
| Inspect | Check for loose, cracked and missing tiles and grout damage |
| Match | Find the closest tile in color, size and finish |
| Prepare | Lower water, remove loose tiles and clean the bed |
| Set | Install tiles with suitable adhesive or mortar |
| Grout | Grout the joints |
| Cure | Allow time before raising the water |
About matching older tile
Many older pools have tile that’s no longer made. We’ll show you the closest match before we start. Some owners choose a complementary accent tile when an exact match isn’t possible.

Water Level and Cure Time
For waterline tiles, we lower the water just below the work area. Tiles deeper on the wall may need more water removed. Our guide on whether a pool needs draining for tile work covers the options.
The new tile and grout then need time to cure before the water comes back up. Cure time depends on the product. Pool-grade polymer-modified mortars and grouts can call for anywhere from a couple of days to several weeks before full immersion, so we follow the manufacturer’s spec for what we install. Raising the water early can push moisture into joints that haven’t finished curing.
Expect the pool to be out of use for a short period. We’ll tell you the timeline for your repair before we start.
Why Loose Tiles Shouldn’t Wait
A missing tile might look minor, but it’s worth fixing soon:
- Sharp edges on neighboring tiles can cut swimmers.
- Water intrusion behind the tile line can loosen more tiles.
- Bigger repairs later. A few tiles today can turn into a whole section if water keeps getting in.
Small pool tile repair is far easier than rebuilding a stretch of waterline. If you’ve noticed a loose pool tile or a gap in the row, call us. We’ll inspect the line, give you matching options and quote the repair along with any cleaning the tile needs.